ESWLogo

*Older Model Parts

Have an older model stove that doesn't show up on our other parts pages?

We will be adding parts to this page periodically. If you don't see the part you need listed here, first use our "Search" field (at the bottom of this page) to enter the part number (if you know it...if not, just enter a description of the part).
If you still cannot find your part, call us at (800) 516-3636 (parts orders only) to order. You can also let us know that you were looking online for the part, and we may be able to add it to this page. (For all other questions and Customer Service calls, call (800) 245-6489.)

IMPORTANT: If at all possible, please be sure to include your stove's model number and manufacture date in the "Ordering Instructions" box when you check out. This is especially important with older models.

Looking for a stove manual for your older model stove? Check out our manuals page; if you don't see what you need, click here to E-mail our Service Dept and request the manual.

Be sure to check your stove's manual (if available) to be sure you are purchasing the correct part for your stove. We do attempt to be as precise as possible when describing the part and the various models each part fits on, but your owner's manual will contain a list of the most common replacement parts for your particular stove.
   
AC-DGKC.jpg AC-DGKC Door Gasket Kit (2 lbs. each)
$15.58
Door Gasket Kit for models manufactured after July 1988. (Note: Also for wood insert models with JC or 20 in model number with manufacture date of 1986-1995). 3/4" round door gasket, includes silicone necessary to install. IMPORTANT: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out.
[Add to Cart]  [View Cart]

   
AC-G9.jpg AC-G9 Glass Kit (4 lbs. each)
$70.35
Door Glass Kit. Includes 9 1/8" x 9 1/8" glass, and gasket necessary to install. Shown on 25-PDVC, works on all stoves listed on this page (EXCEPT large coal and some older models, see notes below. ALSO if you have a wood stove with spin draft controls on the door, see AC-G3 glass.)
**NOTE: COAL STOVE OWNERS - If you own the small coal stove (models 27-C2000 or 50-SHWC2), measure your glass area - you may need AC-G8 glass instead of this glass. Please call if you have questions. If you own the large coal stove (models 27-C3000 or 50-SHWC3), order AC-G8 glass.
**NOTE: For older stove models - Check your owner's manual to insure correct part number. Measure the original glass if owner's manual is not available and compare to sizes listed in these descriptions.
[Add to Cart]  [View Cart]

   
AC-FCGK.jpg AC-FCGK Flue Collar Gasket Kit (2 lbs. each)
$14.55
Flue Collar Gasket Kit. Includes gasket and cement necessary to repair gasket around the stove's flue collar. 3/8" gasket. Include your model number and manufacture date in the "Ordering Instructions" box when you check out.
[Add to Cart]  [View Cart]

   
AC-SB.jpg AC-SB Firebrick (4 lbs. each)
$2.43
9" x 4" x 1.25" Firebrick (small). Priced per brick.
[Add to Cart]  [View Cart]

   
AC-SH_CPM.jpg AC-SH Spring Handle (1 lb. each)
$3.64
Door spring handle (large). Color: Brass. Fits 1/2" diameter rod. Shown on 10-CPM, works on all stoves listed on this page.
[Add to Cart]  [View Cart]

   
CA-20.jpg CA-20 6" Flue Collar (4 lbs. each)
$37.60
6" flue collar. Comes with gasket and bolts necessary to install. Shown on 18-TRD, works on all stoves listed on this page.
NOTE: If you have a wood stove manufactured prior to 1996, measure your flue collar before ordering, you may need the 8" (CA-21) collar. If so, go to the 28-3500 (wood furnace) parts page to add the CA-21 to your Shopping Cart.
[Add to Cart]  [View Cart]

   
AC-LB.jpg AC-LB Firebrick (7 lbs. each)
$2.43
9" x 4" x 2.25" (large) Firebrick. Priced per brick.
[Add to Cart]  [View Cart]

   
AC-GGK.jpg AC-GGK Glass Gasket (and/or Ash Pan Gasket) Kit (1 lb. each)
$14.55
Window glass gasket kit. Includes gasket (approx. 1" x 7' flat, adhesive on one side). Does not include glass.
Includes self-adhesive backing for easy strip and press application.
Is also used as Ash Pan gasket on some stoves, see your stove's parts diagram or owner's manual for reference.
If ordering for glass gasket and ash pan gasket, you should order two kits.
For all orders, in the Comments box, be sure to include 1) Your stove's model number, date of manufacture and serial number AND 2) whether this is being ordered for glass gasket or ash pan gasket.
[Add to Cart]  [View Cart]

   
PU-076002B.jpg PU-076002B Combustion Blower (6 lbs. each)
$138.55
Combustion (Exhaust) Blower. Negative draft. Includes gasket necessary to install, and includes pipe adapter (adapter was formerly Part # CA-1598).
NOTE: For all pellet units EXCEPT 25-PFS/PFSP. See PU-4C440 if you have a 25-PFS.
[Add to Cart]  [View Cart]

   
PU-4C442.jpg PU-4C442 Convection Blower (6 lbs. each)
$130.98
Convection (Room Air) Blower. 140 cfm.

IMPORTANT: For all pellet models listed on this page except 2002 and newer "Deluxe" freestanding and insert pellet models ("Deluxe" models have louvers beside the door and include model numbers models 25-PDV, 25-PI, 55-SHP22, 55-SHP20, 55-TRP22, 55-TRP20, 55-SHP22L and American Heritage models).
If 2002 or newer "Deluxe" model, see Part Number PU-4C447 Convection Blower.

**NOTE on Older Models: Model years 1989-90 use one room air blower; Model years 1991-95 use two room air blowers. (If 1991-95 model, stand behind the stove and determine if "left" or "right" blower, and note this in the "Ordering Instructions" box in your Shopping Cart.)

Model years 1996 and later use one room air blower.

**NOTE: Please include model number and manufacture date of your stove in the "Ordering Instructions" box of your Shopping Cart.
[Add to Cart]  [View Cart]

   
PU-103-50.jpg PU-103-50 Hopper Lid and-or Ash Pan Latch (1 lb. each)
$16.98
Hopper Lid Latch. One per package.
NOTE: As a TOP LID hopper latch, was for pellet stoves manufactured 2001 and earlier.
For pellet stoves manufactured 2002 or later, see Part Number PU-62-40-151-3.
However, is used on some later models as an ash pan latch (Models with 'IP' in model number, for example).
See your stove's parts diagram in your owner's manual.

NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. Shown on 25-PDVC, but works on all stoves listed on this page.
[Add to Cart]  [View Cart]

   
PU-UCF204-12.jpg PU-UCF204-12 Auger Bearing (3 lbs. each)
$23.05
Auger Bearing (block bearing) for pellet units. 3/4" bore. Price listed is for one piece (two pieces are on each stove, one per auger).
[Add to Cart]  [View Cart]

   
PU-2X570.jpg PU-2X570 Locking Collar (1 lb. each)
$3.64
3/4" I.D. Auger Shaft Locking Collar for pellet stoves. Price listed is for one piece (two pieces are on each stove, one per auger).
[Add to Cart]  [View Cart]

   
AC-G3.jpg AC-G3 Glass Kit (3 lbs. each)
$44.87
Glass Kit for 28-IC, 28-JC, 18-PC, 24-AC and 24-FC (FC models prior to 1997 only). Comes with gasket pre-mounted on glass.
NOTE: If you own a 24-FC manufactured between 1997 and 1999, check the measurement. This glass measures 6 7/8" x 7 1/4".
NOTE: If you have spin draft controls on your door (pictured), this is the correct glass.
[Add to Cart]  [View Cart]

   
AC-DGK.JPG AC-DGK Door Gasket Kit (2 lbs. each)
$13.58
Door gasket kit (models manufactured prior to July 1988). Similar to product pictured. Cement included, 3/4" wide flat gasket. IMPORTANT: Include your model number and manufacture date in the "Ordering Instructions" box when you check out.
[Add to Cart]  [View Cart]

   
IP-24AC.jpg IP-24G Impingement Plate (15 lbs. each)
$47.30
Flame impingement plate (baffle). Works with 24-G Wood Furnace. Actual plate is similar to plate pictured here.
[Add to Cart]  [View Cart]

   
IP-25PFS Impingement Plate (16 lbs. each)
$55.79
Impingement Plate (baffle) for 25-PFS pellet stove (actually a set of three plates). Please be sure to list model number and mfg. date in the Ordering Instructions box when you check out.

[Add to Cart]  [View Cart]

   
AC-01.jpg AC-01 Decorative Knob Set (3 lbs. each)
$20.79
Decorative brass knobs. Price and weight shown are for set of two (2) matching knobs. These are designed to simply rest on top of your stove (or any flat surface).
[Add to Cart]  [View Cart]

   
PU-AF12B.jpg PU-AF13B Bottom Auger (9 lbs. each)
$31.54
Bottom Auger. For some 1992-1995 pellet models (refer to your owner's manual to verify part number).
NOTE: Does not include Locking Collar (PU-2X570) or Block Bearing (PU-UCF204-12).
NOTE: Please include your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out.
Similar to product pictured.
[Add to Cart]  [View Cart]

   
PU-BP96WP.jpg PU-BP96WP Wear Plate (2 lbs. each)
$12.13
Wear Plate fits all pellet stoves model 25-PDV, PDVP, PFS , PFSP and TRISTAR 25-5670 manufactured from 1993 to 2000. and all 25-PAF pellet furnace manufactured prior to 1998. This is the plate that holds the pellets; it fits inside the burn pot of the stove.
Plate may or may not be exactly like plate pictured here (this is to give a general idea of appearance of part).
Please be sure to list model number, serial number and mfg. date in the Ordering Instructions box when you check out.
[Add to Cart]  [View Cart]

   
PU-4C440.jpg PU-4C440 Combustion Blower for 25-PFS/P (5 lbs. each)
$93.38
Combustion (Exhaust) Blower. Includes gasket necessary to install, you must save the adapter from your old blower to use with this replacement. If your pellet stove was built by us and has a 6" top exhaust, this should fit it.
NOTE: Only for 25-PFS/25-PFSP models from 1991 and later. See PU-076002B for any other models.
Be sure to include your stove's model number and date of manufacture in the Ordering Instructions box upon checkout.
[Add to Cart]  [View Cart]

   
AC-18 Blower (465 cfm) with cord (17 lbs. each)
$151.74
Blower (Complete) for 24-G {7063-6341}
[Add to Cart]  [View Cart]

   
AC-12.jpg AC-12 Blower Thermostat (3 lbs. each)
$74.64
Fan Thermostat, with blower and instructs.
[Add to Cart]  [View Cart]

   
PG-CG_InGrill.jpg PG-CG Cast Grill Grate (8 lbs. each)
$63.26
Cast Grate for grills with model numbers that contain 'PG100.'
18" x 10.75", cast iron grate that goes into left side of grill. Resides above burn pot area for excellent heat transfer and GREAT looking sear marks.

[Add to Cart]  [View Cart]


Order Inquiries? Email orders@englanderstoves.com or call (Parts Orders & Inquiries ONLY) - (800) 516-3636.

For Customer Service or Technical Questions - Email service@englanderstoves.com or call (800) 245-6489.

We appreciate your business!
*We are not vulnerable to the 'Heartbleed' bug, we are secure.

Your Order
is Secure!
2014 England's Stove Works, Inc.
England's Stove Works, Inc. Home Page