ESWLogo
28-3500and50-SHW35.jpg

28-3500, 50-SHW35 and 50-TRW35 Parts

Whether you own Englander, Summers Heat or Timber Ridge, you'll find the replacement parts and accessories you need right here. Please follow any special instructions for your part; if you have any questions, please call (800) 245-6489 or e-mail service@englanderstoves.com. Otherwise, you may place your order in confidence with Visa or Mastercard (or now - Discover) on our secure server.
 
*Older Model Parts
   
SaleImage.jpg EB-AC - Wood/Coal Early Bird Gasket Kit
$60.26 $48.21 On Sale!
LIMITED Offer "Early Bird" Special for Wood (and our old Coal) units.
For wood units (except models that have with 12, 13, 17, or 30 in model number (30-NC, 50-SNC13, etc.) or models with ICD or 25 in the model number (or wood insert models with 24-JC or '20' in model number that also have manufacture date of 1996 or later- See these stoves' parts pages for kits for these models).
Be sure to enter your stove's model number and date of manufacture in the "Ordering Instructions" box when you check out.
NOTE: Offer ends soon, beat the fall price increases...
Includes (2) AC-DGKC Door Gaskets (with silicone necessary to install); AC-GGK Window Gasket; AC-FCGK Flue Collar & Flange Gasket.
Note that it NOW includes (2) of the AC-DGKC gaskets -- for stoves that need ash pan gasket (i.e. wood add-on furnace)...or can be used as an extra door gasket kit for later!
(Scroll down this page or use Edit - Find in your web browser and enter each part number to see the individual parts.)
SAVE over $12 off Retail AND get Free Shipping on this part!*
*Sorry, Free Shipping does not apply to Alaska or otherwise outside of the contiguous U.S. (48 States). We will contact you with a shipping cost.
[Add to Cart]  [View Cart]

   
AC-01.jpg AC-01 Decorative Knob Set (3 lbs. each)
$20.79
Decorative brass knobs. Price and weight shown are for set of two (2) matching knobs. These are designed to simply rest on top of your stove (or any flat surface).
[Add to Cart]  [View Cart]

   
AC-106-P.jpg AC-106-P / SH-106-P Brass Window Trim (2 lbs. each)
$40.02
Brass Window Trim. Comes with clip for installation.
Note: Shown on 25-PDVC, works on any stove (wood, pellet, coal or furnace) with our standard sized window (8-1/2" x 8-1/2" window opening).
NOTE: Coal Stove owners - for 27-C2000 and 50-SHWC2 ONLY, not for 27-C3000 or 50-SHWC3.
[Add to Cart]  [View Cart]

   
AC-106-PBN.jpg AC-106-PBN Nickel Window Trim (2 lbs. each)
$40.02
Nickel Window Trim. Comes with clip for installation.
Note: Shown on 55-SHP10L, works on any stove (wood, pellet, coal or furnace) with our standard sized window (8-1/2" x 8-1/2" window opening).
NOTE: Coal Stove owners - for 27-C2000 and 50-SHWC2 ONLY, not for 27-C3000 or 50-SHWC3.
[Add to Cart]  [View Cart]

   
AC-119.jpg AC-119 Brass Lip Trim (2 lbs. each)
$29.96
Brass Lip Trim. One piece. Shown on 25-PUF, fits all models listed on this page.
[Add to Cart]  [View Cart]

   
AC-1339.jpg AC-1339 Thermostat (2 lbs. each)
$83.64
HW Thermostat for 28-3500 (fan thermostat for blower). Included are thermostat (as pictured) and instructions. Will work with our old style thermostat that had the sliding Manual/Auto switch.
[Add to Cart]  [View Cart]

   
AC-1677.jpg AC-1677 Stovetop Adapter - For 6" Pipe (2 lbs. each)
$14.84
Reduces 6" pipe down by 1/8" smaller inside diameter.
Good for fitting 6" wood stove pipe to a stove that has a collar that is slightly smaller than 6". Approximately 4 1/2" in length.
[Add to Cart]  [View Cart]

   
BM-1376.jpg AC-2835BA Assembled Blower for Add-On Furnace (15 lbs. each)
$295.81
Complete blower assembly for our add-on wood furnace. Includes blower motor (BM-1376), thermostat (AC-1339) and power cord, assembled.
[Add to Cart]  [View Cart]

   
AC-AD35 Ash Pan (15 lbs. each)
$170.94
Ash Pan for add-on furnace. Has handles on each end, fits inside stove behind lower (ash) door.

[Add to Cart]  [View Cart]

   
AC-AV.jpg AC-AV Ash Vacuum (30 lbs. each)
$254.95
**PLEASE NOTE: This part will drop ship from the manufacturer, and may take a week or longer than parts that ship from our location.
For fireplaces, barbeques or our wood and pellet stoves (very handy item for our stoves!).
Makes for much easier and "cleaner" ash cleaning experience. Comes with flame retardant hose.
3 gallon ash capacity; Height 20". Also available: See our AC-AVT Tool Package.
Learn more about our Ash Vacuum
[Add to Cart]  [View Cart]

   
AC-AV2.jpg AC-AV2 Ash Vacuum (30 lbs. each)
$274.95
**PLEASE NOTE: This part will drop ship from the manufacturer, and may take a week or longer than parts that ship from our location.
For fireplaces, barbeques or our wood and pellet stoves (very handy item for our stoves!).
If you have ever tried to vacuum out your ashes with a vacuum cleaner only to turn around when you are done to see a cloud of ash hovering around your head then you have come to the right spot.
The AC-AV2 is the Cadillac of Ash Vacuums. With its quiet design and powerful motor, this is the vacuum of choice. This vacuum is "the quiet one."
Makes for much easier and "cleaner" ash cleaning experience. Comes with flame retardant hose.
3 gallon ash capacity; Height 20". Also available: See our AC-AVT Tool Package.
Learn more about our Ash Vacuum
[Add to Cart]  [View Cart]

   
AC-AVF.jpg AC-AVF Filter Package for Ash Vac (1 lb. each)
$38.95
**PLEASE NOTE: This part will drop ship from the manufacturer, and may take a week or longer than parts that ship from our location.
Filter Kit Package for the AC-AV and AC-AV2 Ash Vacuum (works with either vac).
Includes: Primary Filter and Secondary Filter (both are required).
These filters will typically last for many years depending on the use, but it is a good idea to have a filter package on hand for replacement purposes.
NOTE: These filters are only for the Loveless brand ash vacuums, will not fit others.
[Add to Cart]  [View Cart]

   
AC-AVT.jpg AC-AVT Tool Kit for Ash Vac (2 lbs. each)
$20.95
**PLEASE NOTE: This part will drop ship from the manufacturer, and may take a week or longer than parts that ship from our location.
Tool Package for the AC-AV or AC-AV2 Ash Vacuum (works with either vac).
Includes: Crevice Tool, Brush Tool and Pellet Stove Cleaning Hose.
This package is a must for pellet stove owners, as the cleaning hose will allow you to reach small openings much easier.
Also, Wood and Pellet stove owners: Brush Tool is made of horse hair (very good at cleaning stove door glass!)

[Add to Cart]  [View Cart]

   
AC-BD8.gif AC-BD8 8" Butterfly Damper (2 lbs. each)
$42.70
Eight-inch (8") directional butterfly damper. To be installed in the 8" hot air outlet pipe from the add-on furnace, as shown in the Owner's Manual. Damper and pipe section, 8" diameter x approximately 8" long.
[Add to Cart]  [View Cart]

   
AC-DGKC.jpg AC-DGKC Door Gasket Kit (2 lbs. each)
$15.58
Door Gasket Kit for models manufactured after July 1988. (Note: Also for wood insert models with JC or 20 in model number with manufacture date of 1986-1995). 3/4" round door gasket, includes silicone necessary to install. IMPORTANT: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out.
[Add to Cart]  [View Cart]

   
AC-FCGK.jpg AC-FCGK Flue Collar Gasket Kit (2 lbs. each)
$14.55
Flue Collar Gasket Kit. Includes gasket and cement necessary to repair gasket around the stove's flue collar. 3/8" gasket. Include your model number and manufacture date in the "Ordering Instructions" box when you check out.
[Add to Cart]  [View Cart]

   
AC-G9.jpg AC-G9 Glass Kit (4 lbs. each)
$70.35
Door Glass Kit. Includes 9 1/8" x 9 1/8" glass, and gasket necessary to install. Shown on 25-PDVC, works on all stoves listed on this page (EXCEPT large coal and some older models, see notes below. ALSO if you have a wood stove with spin draft controls on the door, see AC-G3 glass.)
**NOTE: COAL STOVE OWNERS - If you own the small coal stove (models 27-C2000 or 50-SHWC2), measure your glass area - you may need AC-G8 glass instead of this glass. Please call if you have questions. If you own the large coal stove (models 27-C3000 or 50-SHWC3), order AC-G8 glass.
**NOTE: For older stove models - Check your owner's manual to insure correct part number. Measure the original glass if owner's manual is not available and compare to sizes listed in these descriptions.
[Add to Cart]  [View Cart]

   
AC-GGK.jpg AC-GGK Glass Gasket (and/or Ash Pan Gasket) Kit (1 lb. each)
$14.55
Window glass gasket kit. Includes gasket (approx. 1" x 7' flat, adhesive on one side). Does not include glass.
Includes self-adhesive backing for easy strip and press application.
Is also used as Ash Pan gasket on some stoves, see your stove's parts diagram or owner's manual for reference.
If ordering for glass gasket and ash pan gasket, you should order two kits.
For all orders, in the Comments box, be sure to include 1) Your stove's model number, date of manufacture and serial number AND 2) whether this is being ordered for glass gasket or ash pan gasket.
[Add to Cart]  [View Cart]

   
AC-HP.jpg AC-HP Hinge Pin Rivet (1 lb. each)
$1.25
Hinge Pin Rivet for cast stove door; 3/8" x 1 3/4". Price shown is for one pin.

[Add to Cart]  [View Cart]

   
AC-RTV3.jpg AC-RTV3 Silicone (1 lb. each)
$10.91
3 oz. tube black silicone. Tested to 425 degrees F.
[Add to Cart]  [View Cart]

   
AC-SB.jpg AC-SB Firebrick (3.5 lbs. each)
$2.43
9" x 4" x 1.25" Firebrick (small). Priced per brick.
[Add to Cart]  [View Cart]

   
28-3500bricklayout.jpg AC-SB7.75 Firebrick (3.5 lbs. each)
$2.43
7.75" x 4" x 1.25" Firebrick. Priced per brick. Weight is based on UPS shipping weight. Be sure to include your Model Number and Date of Manufacture in the "Ordering Instructions" box when checking out.
Check your stove's layout and measure the brick you are replacing, if possible, to ensure you are ordering the correct size.
[Add to Cart]  [View Cart]

   
AC-SH_CPM.jpg AC-SH Spring Handle (1 lb. each)
$3.64
Door spring handle (large). Color: Brass. Fits 1/2" diameter rod. Shown on 10-CPM, works on all stoves listed on this page.
[Add to Cart]  [View Cart]

   
AC-SH4.jpg AC-SH4 Spring Handle (1 lb. each)
$2.43
Spring Handle for Slide Damper. Color: Brass. Fits 1/4" diameter rod. Shown on 24-ACD, works for all stoves listed on this page. Important - please enter the manufacture date and model number of your stove in the "Ordering Instructions" box of your order form when you check out.
[Add to Cart]  [View Cart]

   
AC-SH4N.jpg AC-SH4N Nickel Spring Handle (1 lb. each)
$2.43
Spring Handle for Slide Damper. Color: Nickel. Fits 1/4" diameter rod. Shown on 50-SHW16L, works for all stoves listed on this page. Important - please enter the manufacture date and model number of your stove in the "Ordering Instructions" box of your order form when you check out.
[Add to Cart]  [View Cart]

   
AC-SHN_CPM.jpg AC-SHN Nickel Spring Handle (1 lb. each)
$3.64
Door Spring Handle (large). Color: Brushed Nickel. Fits 1/2" diameter rod. Shown on 49-SHCPML, works on all stoves listed on this page.
[Add to Cart]  [View Cart]

   
BM-1376.jpg BM-1376 Blower Motor (14 lbs. each)
$212.17
Blower Motor for our add-on furnace; 850 cfm.
NOTE: Does not include thermostat (AC-1339) or power cord.
If you want the entire assembly (blower motor, thermostat and power cord), see AC-2835BA.
[Add to Cart]  [View Cart]

   
CA-21.jpg CA-21 8" Flue Collar (7 lbs. each)
$65.20
8" Flue Collar. Comes with bolts and gasket necessary to install.
[Add to Cart]  [View Cart]

   
CA-21A.jpg CA-21A 8" Flue Collar (2 lbs. each)
$13.13
Flue Collar, 8" diameter with "finger tabs" to fit to hot air outlet on the add-on wood furnace. Galvanized. Also replaces cast CA-21 collar on older models.
[Add to Cart]  [View Cart]

   
CA-24.jpg CA-24 Draft Cap (4 lbs.)
$14.50
Cast Iron Draft Control Cap, with Bolts & Nuts (1 per package). Shown on 28-3500, also used on older model stoves. (24-AC/FC)
[Add to Cart]  [View Cart]

   
IP-2835.jpg IP-2835 Impingement Plate (18 lbs. each)
$47.30
Impingement plate (baffle) for wood add-on furnace with model numbers that begin with 28-3500, 50-SHW35 or 50-TRW35 that was manufactured 2006 to present.
Actual plate is similar to plate pictured here (no holes).
NOTE: Please list the Manufacture Date and Model Number of your stove in the "Ordering Instructions" box of your Shopping Cart before checking out.
[Add to Cart]  [View Cart]

   
IP-2835.jpg IP-2835-06 Impingement Plate (18 lbs. each)
$47.30
Impingement plate (baffle) for wood add-on furnace with model numbers that begin with 28-3500, 50-SHW35 or 50-TRW35 that was manufactured PRIOR TO 2006.
Actual plate is similar to plate pictured here (no holes).
NOTE: Please list the Manufacture Date and Model Number of your stove in the "Ordering Instructions" box of your Shopping Cart before checking out.
[Add to Cart]  [View Cart]


Order Inquiries? Email orders@englanderstoves.com or call (Parts Orders & Inquiries ONLY) - (800) 516-3636.

For Customer Service or Technical Questions - Email service@englanderstoves.com or call (800) 245-6489.

We appreciate your business!
*We are not vulnerable to the 'Heartbleed' bug, we are secure.

Your Order
is Secure!
2014 England's Stove Works, Inc.
England's Stove Works, Inc. Home Page