ESWLogo
25-PAH.jpg

25-PAH, 55-SHPAH, 55-SHPAHL and 55-TRPAH Parts

    Whether you own Englander, Summers Heat or Timber Ridge, you'll find the replacement parts and accessories you need right here. Please follow any special instructions for your part; if you have any questions, please call (800) 245-6489 or e-mail service@englanderstoves.com. Otherwise, you may place your order in confidence with Visa, Mastercard or Discover on our secure server.

Not sure if you're looking at the part you need? Click Here to see this stove's parts diagram.

   
SaleImage.jpg EB-PAHGK - PAH Pellet Early Bird Gasket Kit
$101.77 $81.52 On Sale!
LIMITED Offer "Early Bird" Special for PAH Pellet units.
NOTE: Offer ends soon, beat the fall price increases...
SAVE OVER $20 off Retail and get Free Shipping on this part!*
Includes AC-DGKNC Door Gasket (includes silicone necessary to install); Two (2) AC-GGK Window Gaskets (one for glass, one for ash pan); PU-HLG Hopper Lid Gasket; PU-CBG Combustion Blower Gasket; PU-CGEP Cradle Gasket. ALSO: Now includes PU-CMG Combustion Motor Gasket AND PU-VH Vacuum Hose!
(Scroll down this page or use Edit - Find in your web browser and enter each part number to see the individual parts.)

Shipping IS INCLUDED in the price of this kit. Free shipping will apply automatically to this kit on this order.
*Sorry, Free Shipping does not apply to Alaska or otherwise outside of the contiguous U.S. (48 States). We will contact you with a shipping cost.
Be sure to enter your stove's model number and date of manufacture in the "Ordering Instructions" box when you check out.

[Add to Cart]  [View Cart]

   
SaleImage.jpg EB-PAHOK - PAH Pellet Overhaul Kit (17 lbs. each)
$521.40 $419.35 On Sale!
LIMITED Offer "Early Bird" Special for our "Pellet Auxiliary Heater" Pellet units...This is a full "overhaul kit" for your Pellet stove (with PAH in the model number).
NOTE: Offer ends soon, beat the fall price increases...

Includes CU-047042 Auger Motor; PU-076002B Combustion Blower; PU-4C447 Convection Blower; AC-DGKNC Door Gasket (includes silicone necessary to install); Two (2) AC-GGK Window Gaskets (one for glass, one for ash pan); PU-HLG Hopper Lid Gasket; PU-CBG Combustion Blower Gasket; PU-CGEP Cradle Gasket. ALSO: Now includes PU-CMG Combustion Motor Gasket AND PU-VH Vacuum Hose!
(Scroll down this page or use Edit - Find in your web browser and enter each part number to see the individual parts.)

IMPORTANT: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out.

LIMITED TIME -- SAVE BIG -- SAVE OVER $100.00 and FREE SHIPPING for the kit!!* Free Shipping will automatically apply to this kit on this web order.
*Sorry, Free Shipping does not apply to Alaska or otherwise outside of the contiguous U.S. (48 States). We will contact you with a shipping cost.
[Add to Cart]  [View Cart]

   
AC-108.jpg AC-108 Brass Accent Trim Ring (2 lbs. each)
$40.02
Brass trim. Fits doors with 9.25" x 16.5" glass. Shown on 13-NCL, works with any stove on this page except stoves with gold-plated doors.
Does not include two-piece lip trim; see AC-107 for lip trim.
Note: Lip trim is not available for Pellet Auxiliary Heater (stoves with "PAH" in model number).
[Add to Cart]  [View Cart]

   
AC-108BN.jpg AC-108BN Nickel Accent Trim Ring (2 lbs. each)
$40.02
Brushed Nickel trim. Fits doors with 9.25" x 16.5" glass. Shown on 50-SNC13PL, works with any stove on this page except stoves with gold-plated doors.
Does not include two-piece lip trim; see AC-107BN for lip trim.
Note: Lip trim is not available for Pellet Auxiliary Heater (stoves with "PAH" in model number).
[Add to Cart]  [View Cart]

   
AC-3000PelletVentKit.jpg AC-3000 3" Pellet Vent Kit (16 lbs. each)
$253.41
Through-the-wall 3" Pellet Vent Kit (mfg. by Dura-Vent). Contains all the parts needed for most pellet installations. NOTE: See AC-3000 page on our site for more info. Not for pellet insert. See your manual (and call Technical Support at (800) 245-6489, if questions) for insert installation.
Not for high altitude (over 4,000 ft.); see AC-3100 kit.
See Owner's Manual for information on long runs of pipe, basement installs, and general installation information. Always follow local codes.
[Add to Cart]  [View Cart]

   
AC-3003.jpg AC-3003 Remote Thermostat (2 lbs. each)
$167.48
Enjoy the convenience of remote control with your Pellet stove! (See exceptions below)...
-- Without having to purchase a retro kit or any other expensive adaptation.

System is simple to install - installs in about 5 minutes!
This great remote control system will fit your existing Englander, Summers Heat or Timber Ridge Pellet stove (fits all pellet models with manufacture date between 1993 and 2003).
NOTE: Will NOT work with 2004 or later pellet stove, with the exception of the models listed below. If you have a 2004 or later pellet stove, see wall thermostat.
(NOTE: Exception -- Does work with our multi-fuel stoves (stoves with CPM in model number), and DOES work with our pellet stoves with "EP" or "PAH" or "IP" in model number).
Learn more about our Remote Thermostat
[Add to Cart]  [View Cart]

   
AC-DGKNC.jpg AC-DGKNC Door Gasket Kit (2 lbs. each)
$14.55
Door gasket kit (for models listed on this page). Includes silicone necessary to install; 5/8" round gasket. Include your model number and manufacture date in the "Ordering Instructions" box when you check out.
[Add to Cart]  [View Cart]

   
AC-G17.jpg AC-G17 Glass Kit (4 lbs. each)
$105.51
Door Glass Kit. Includes 9 1/4" x 16 1/2" glass, and gasket necessary to install. Shown on wood stove, fits all models listed on this page.
[Add to Cart]  [View Cart]

   
AC-GGK.jpg AC-GGK Glass Gasket (and/or Ash Pan Gasket) Kit (1 lb. each)
$14.55
Window glass gasket kit. Includes gasket (approx. 1" x 7' flat, adhesive on one side). Does not include glass.
Includes self-adhesive backing for easy strip and press application.
Is also used as Ash Pan gasket on some stoves, see your stove's parts diagram or owner's manual for reference.
If ordering for glass gasket and ash pan gasket, you should order two kits.
For all orders, in the Comments box, be sure to include 1) Your stove's model number, date of manufacture and serial number AND 2) whether this is being ordered for glass gasket or ash pan gasket.
[Add to Cart]  [View Cart]

   
AC-GS13 Glass Support for CA-13 Door (1 lb. each)
$7.59
Glass Support Set for CA-13 door.
Click Here to see a parts diagram, Glass Support Set is number 22 on diagram, on the door diagram below the main stove drawing. Shown on 25-PAH model, but works for any stove with a CA-13 door.

[Add to Cart]  [View Cart]

   
AC-HLSA.JPG AC-HLSA Hopper Lid Safety Switch Arm Lever (1 lb. each)
$16.99
Hopper Lid Safety Switch. Sometimes listed as AC-HLS or PU-HLS.
Important! You must replace with the type of switch that came with your stove...If your switch is a "button" type rather than this, see AC-HLSB.
AND please specify the model number AND manufacture date of your stove in the "Ordering Instructions" box of your Shopping Cart before checking out.
[Add to Cart]  [View Cart]

   
AC-HLSB.JPG AC-HLSB Hopper Lid Safety Switch Button Type (1 lb. each)
$16.99
Hopper Lid Safety Switch. Sometimes listed as AC-HLS or PU-HLS.
(NOTE: Also for pellet grill/smokers with PG100 in model number)
Important! You must replace with the type of switch that came with your stove...If your switch is a "arm" type rather than this, see AC-HLSA.
AND please specify the model number AND manufacture date of your stove in the "Ordering Instructions" box of your Shopping Cart before checking out.
[Add to Cart]  [View Cart]

   
AC-HP.jpg AC-HP Hinge Pin Rivet (1 lb. each)
$1.25
Hinge Pin Rivet for cast stove door; 3/8" x 1 3/4".
Shown on compact pellet stove, works for all stoves shown on this page.
Price shown is for one pin, update qty. in cart if you need two.

[Add to Cart]  [View Cart]

   
AC-MBSP.jpg AC-MBSP Black Spray Paint (2 lbs. each)
$13.13
High-temperature black spray paint. 12 oz. can.
NOTE: By law, this item can only be shipped UPS Ground (even if you phone in your order), no express available.
Two cans of paint should paint your entire unit.
Older Units: Replaces AC-MCSP (charcoal gray) spray paint if you have an older stove.
(Not for powder-coated gas units; order AC-PCBSP if you have a powder-coated gas unit.)
[Add to Cart]  [View Cart]

   
AC-SH_CPM.jpg AC-SH Spring Handle (1 lb. each)
$3.64
Door spring handle (large). Color: Brass. Fits 1/2" diameter rod. Shown on 10-CPM, works on all stoves listed on this page.
[Add to Cart]  [View Cart]

   
AC-SHN_CPM.jpg AC-SHN Nickel Spring Handle (1 lb. each)
$3.64
Door Spring Handle (large). Color: Brushed Nickel. Fits 1/2" diameter rod. Shown on 49-SHCPML, works on all stoves listed on this page.
[Add to Cart]  [View Cart]

   
CA-AC.jpg CA-AC Auger Coupler (1 lb. each)
$14.55
Auger Coupler for stove models listed on this page.
Click Here to see an auger motor diagram (from the "EP" Stove), Auger Coupler is number 15 on diagram.
Coupler works with all models listed on this page.
**NOTE: Please specify your stove's Model Number and Manufacture Date in the "Ordering Instructions" box on the Checkout screen when ordering this part.
[Add to Cart]  [View Cart]

   
CA-AMPP.jpg CA-AMPP Auger Mounting Plate (5 lbs. each)
$30.43
Auger Mounting Plate for stove models listed on this page.
Click Here to see an auger motor diagram (from the "EP" Stove), Mounting Plate (Collar) is number 14 on diagram.
Mounting plate does work with all models listed on this page.
**NOTE: Please specify your stove's Model Number and Manufacture Date in the "Ordering Instructions" box on the Checkout screen when ordering this part.
[Add to Cart]  [View Cart]

   
CU-047042_CU-047044.jpg CU-047042 2.4 RPM Motor (4 lbs. each)
$130.98
2.4 rpm auger ('feed') motor for our Multi-Fuel unit - models with 10-CPM, 49-SHCPM, 49-SHCPML or 49-TRCPM in the model number.
ALSO is the auger ('feed') motor for the pellet utility furnace (Models with "PUF" in model number) AND the Pellet Auxiliary Heater (Models with "PAH" in the model number).
Also is the 'feed' auger motor for "Evolution Pellet" and "Imperial Pellet" models (Models with "EP" or "IP" in model number).
ALSO is the stirrer motor (turns the stirrer) for the Corn Stove - model numbers 10-CDV, 49-SHC22 or 49-TRC22.

[Add to Cart]  [View Cart]

   
CU-RG.jpg CU-RG Rubber Vibration Dampener (1 lb. each)
$3.64
1/4" wide X 3" Gasket for models listed on this page...
Click Here to see an auger motor diagram (from IP stove), CU-RG is number 29 on diagram. NOTE: Interchangeable with CU-RGN nylon gasket, both perform the same function.
Works with all models listed on this page. Please note your stove's Model Number and Date of Manufacture in the Ordering Instructions box at Checkout.
[Add to Cart]  [View Cart]

   
CU-VS.jpg CU-VS Vacuum Shut-Down Switch (1 lb. each)
$50.94
Vacuum Shut Down Switch. This is the "Door Ajar Switch." The vacuum hose from this switch connects directly to the firebox of the stove.
This part is used in 2006 and later model pellet stoves.
Contact Technical Support at (800) 245-6489 if you have any questions.
NOTE: May replace PU-VS-A listed in the original owner's manual. PLEASE NOTE your stove's Model Number and Date of Manufacture in the Ordering Instructions section of your checkout screen.
[Add to Cart]  [View Cart]

   
PAH-AP.jpg PAH-AP Ash Pan (10 lbs. each)
$21.48
Ash Pan for Pellet Auxiliary Heater models listed on this page.
Click Here to see a parts diagram, Ash Pan is number 26 on diagram.

[Add to Cart]  [View Cart]

   
PU-BPEP.jpg PAH-BP Burn Pot (5 lbs. each)
$63.75
Burn Pot unit for Pellet Auxiliary Heater models listed on this page. This is a one-piece unit, and is the actual burn pot (does not include the "cradle" - see picture). Similar to what is pictured, see parts diagram for exact drawing:
Click Here to see a parts diagram, Burn Pot is number 18 on diagram.

[Add to Cart]  [View Cart]

   
PU-BPCEP.jpg PAH-BPC Burn Pot Cradle (15 lbs. each)
$74.00
Burn Pot Cradle for Pellet Auxiliary Heater models listed on this page. This is a one-piece unit, and is the "cradle" that houses the burn pot; it does not include the burn pot (see picture).
Cradle is similar but not identical to what is pictured; see parts diagram for exact drawing:
Click Here to see a parts diagram, Cradle is number 17 on diagram.

[Add to Cart]  [View Cart]

   
PU-CB04.jpg PAH-CB09 Digital Control Board (3 lbs. each)
$217.09
Digital System Control Board (rear of board is pictured). For Pellet Auxiliary Heater models listed on this page.
**NOTE: Please specify your stove's Model Number and Manufacture Date in the "Ordering Instructions" box on the Checkout screen when ordering this part.
[Add to Cart]  [View Cart]

   
PAH-ECC.jpg PAH-ECC Cleanout Covers (2 lbs. each)
$6.90
Exhaust Cleanout Covers for Pellet Auxiliary Heater models listed on this page. There are two covers (one on either side of the burn pot); this is for the set of both covers.
Click Here to see a parts diagram, Cleanout Covers are number 16 on diagram.
Please be sure to list model number, serial number and mfg. date in the Ordering Instructions box when you check out.
[Add to Cart]  [View Cart]

   
PU-076002B.jpg PU-076002B Combustion Blower (6 lbs. each)
$138.55
Combustion (Exhaust) Blower. Negative draft. Includes gasket necessary to install, and includes pipe adapter (adapter was formerly Part # CA-1598).
NOTE: For all pellet units EXCEPT 25-PFS/PFSP. See PU-4C440 if you have a 25-PFS.
[Add to Cart]  [View Cart]

   
PU-4C447.jpg PU-4C447 Convection Blower (8 lbs. each)
$150.10
Convection (Room Air) Blower. 250 cfm.
**NOTE: For all models listed on this page - including Corn/Multifuel Stoves, Pellet Utility Furnace, Pellet Auxiliary Heater and 2002 and later "Deluxe" freestanding and insert pellet models. Also "Imperial Pellet" models.
NOTE: For "Deluxe" models made before 2002, see PU-4C442 Convection Blower ("Deluxe" models have louvers: 25-PDV and 25-PI, 55-SHP22, 55-SHP22L and 55-SHP20, 55-TRP22 and 55-TRP20, American Heritage).

**NOTE: Please include model number and manufacture date of your stove in the "Ordering Instructions" box of your Shopping Cart.
[Add to Cart]  [View Cart]

   
PU-62-40-151-3.jpg PU-62-40-151-3 Hopper Lid Latch (1 lb.)
$25.91
Recessed Hopper Lid Latch. One per package.
NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. For all pellet units manufactured 2002 and later. For units manufactured prior to 2002, see Part Number PU-103-50.
(NOTE: Also for our pellet grill/smokers with PG100 in model number).
[Add to Cart]  [View Cart]

   
PU-AFEP.jpg PU-AFEP Auger (2 lbs. each)
$31.54
Steel Auger for all "Evolution Pellet" (Freestanding and Insert models with EP in model number), Pellet Utility Furnace and Pellet Auxiliary Heater Stove models listed on this page. Also for "Imperial Pellet" units (IP in model number).
NOTE: Auger only, does not include any other auger assembly parts.
Click Here to see an auger motor diagram (from the "Evolution Pellet" Stove), Auger is number 21 on diagram.
PLEASE NOTE your stove's Model Number and Date of Manufacture in the Ordering Instructions box when you Checkout.
[Add to Cart]  [View Cart]

   
PU-CBF6.jpg PU-CBF6 Control Board Fuse (1 lb. each)
$6.16
Fuse for Control Board. Box of 5.
NOTE: This is the replacement for all pellet stoves (6 amp, 120 V fuse).
NOTE: If you have a stove that was supplied with a 5 amp, 120 Volt fuse, this can be used as a replacement.
[Add to Cart]  [View Cart]

   
PU-CBMG.jpg PU-CBMG Combustion Blower Gasket and Motor Gasket (1 lb. each)
$13.50
Contains the following two items:
1. Combustion Blower Gasket. Fits on Exhaust (Combustion) Blower flange, where blower meets stove. The odd-shaped gasket pictured at top left.
2. Combustion Blower Motor Gasket. Fits on Exhaust (Combustion) Blower motor, so that you can remove the motor from the Combustion Blower housing, clean your stove, and replace the motor and gasket without having to remove the entire Combustion Blower.
Replace the appropriate gasket each time you remove your motor (or entire blower assembly) to clean it.
NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out.
[Add to Cart]  [View Cart]

   
PU-CGEP.jpg PU-CGEP Cradle Gasket (1 lb. each)
$9.24
Cradle Gasket for models listed on this page.
Gasket may have round holes or slots, either will work.
Click Here to see a parts diagram, Cradle Gasket is number 6 on diagram. This shows the Cradle Gasket on models with "EP" in model number, but it works for all models listed on this page; see owner's manual or parts diagram for your stove.
NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out.
[Add to Cart]  [View Cart]

   
PU-CH.jpg PU-CHA Cartridge Heater (Assembled) (1 lb. each)
$64.37
Cartridge Heater element for Auto-Start pellet units (Auto-Start units have manufacture date of 2004 or later). Comes with locking collar.
(NOTE: This is also the igniter for pellet grills with PG100 in the model number.)

This is the element that fits inside the Auto-Igniter element tube...this element fits the bolt-on tube (stoves manufactured before August 2004) as well as the built-in cast tube (stoves manufacutured after August 1, 2004).
Please include your stove's Model Number and Date of Manufacture in the Ordering Instructions box before checking out.
[Add to Cart]  [View Cart]

   
PU-DTSTAT.jpg PU-DTSTAT Wall Thermostat (1 lb. each)
$56.85
Digital Wall Thermostat. Can be used on all of our pellet units, as well as our multi-fuel unit.
Mercury-Free!
Comes with proprietary instructions for installing on our units.
NOTE: Does NOT turn pellet stove On & Off, it does increase or decrease the pellet feed rate as needed.
EXCEPTION: For our multi-fuel model and our pellet models with "EP," "IP" or "PAH" in model number, will turn entire unit on & off as needed OR use a "High/Low" mode of operation (download your stove's owner's manual and call Tech. Support if you have questions).
[Add to Cart]  [View Cart]

   
PU-DVDPAH.jpg PU-DVDPAH Video for Pellet Auxiliary Heater (DVD, 1 lb. each)
$0.00
For our Pellet Auxiliary Heater... DVD which covers a variety of pellet stove installation, maintenance and servicing procedures for Englander, Summers Heat and Timber Ridge models.
Video length: Approximately 45 minutes.
Everything you need to get started.
Cost:You pay only Shipping & Processing.

[Add to Cart]  [View Cart]

   
PU-HLG.jpg PU-HLG Gasket (1 lb. each)
$18.98
Hopper Lid Gasket for pellet stove hopper lids. Includes self-adhesive backing for easy strip and press application.
NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out.
[Add to Cart]  [View Cart]

   
PU-PGB52.jpg PU-PGB52 Insulation Exhaust Tube Gasket (1 lb. each)
$13.10
Insulation Exhaust Tube Gasket.
Wraps around Exhaust Tube of stove.
**NOTE: Please specify the model number and manufacture date of your stove in the "Ordering Instructions" box of your Shopping Cart before checking out.
[Add to Cart]  [View Cart]

   
PU-VH.jpg PU-VH Vacuum Hose Kit (1 lb. each)
$12.07
Vacuum Hose Kit for vacuum shut-down switch. Contains one (1) five-foot length of hose that can be cut to fit your model, plenty of clamps (6), and instructions. Vacuum Switch not included.
For all stove models listed on this page.
**NOTE: Please specify your stove's Model Number and Manufacture Date in the "Ordering Instructions" box on the Checkout screen when ordering this part.
[Add to Cart]  [View Cart]


Order Inquiries? Email orders@englanderstoves.com or call (Parts Orders & Inquiries ONLY) - (800) 516-3636.

For Customer Service or Technical Questions - Email service@englanderstoves.com or call (800) 245-6489.

We appreciate your business!
*We are not vulnerable to the 'Heartbleed' bug, we are secure.

Your Order
is Secure!
2014 England's Stove Works, Inc.
England's Stove Works, Inc. Home Page