|
Whether you own Englander, Summers Heat or Timber Ridge, you'll find the replacement parts and accessories you need right here. Please follow any special instructions for your part; if you have any questions, please call (800) 245-6489 or e-mail service@englanderstoves.com. Otherwise, you may place your order in confidence with Visa or Mastercard (or now - Discover) on our secure server.
|
EB-EPGK - EP Pellet Early Bird Gasket KitLIMITED Offer "Early Bird" Special for EP "Evolution Pellet" units (freestanding or insert). NOTE: Offer ends soon, beat the fall price increases... SAVE almost $20 off Retail and get Free Shipping on this part!* Includes AC-DGKEP Door Gasket (includes silicone necessary to install); AC-GGKEP Window Gasket; PU-HLG Hopper Lid Gasket; PU-CBG Combustion Blower Gasket; AC-APG Ash Pan Gasket; PU-CGEP Cradle Gasket. Now includes PU-CMG Combustion Motor Gasket! Shipping IS INCLUDED in the price of this kit. Free shipping will apply automatically to this kit on this order. *Sorry, Free Shipping does not apply to Alaska or otherwise outside of the contiguous U.S. (48 States). We will contact you with a shipping cost. Be sure to enter your stove's model number and date of manufacture in the "Ordering Instructions" box when you check out. [Add to Cart] [View Cart] |
|
EB-EPOK - EP Pellet Overhaul Kit (17 lbs. each) LIMITED Offer "Early Bird" Special for our "Evolution Pellet" EP Pellet units...This is a full "overhaul kit" for your EP Pellet stove (freestanding or insert). NOTE: Offer ends soon, beat the fall price increases... Includes CU-047042 Auger Motor; PU-076002B Combustion Blower; PU-4C442 Convection Blower; AC-DGKEP Door Gasket (includes silicone necessary to install); AC-GGKEP Window Gasket; PU-HLG Hopper Lid Gasket; PU-CBG Combustion Blower Gasket; AC-APG Ash Pan Gasket; PU-CGEP Cradle Gasket. Now includes PU-CMG Combustion Motor Gasket! IMPORTANT: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. LIMITED TIME -- SAVE BIG -- SAVE ALMOST $100.00 and FREE SHIPPING for the kit!!* Free Shipping will automatically apply to this kit on this web order. *Sorry, Free Shipping does not apply to Alaska or otherwise outside of the contiguous U.S. (48 States). We will contact you with a shipping cost. [Add to Cart] [View Cart] |
PU-076002B Combustion Blower (6 lbs. each)$138.55 Combustion (Exhaust) Blower. Negative draft. Includes gasket necessary to install, and includes pipe adapter (adapter was formerly Part # CA-1598). NOTE: For all pellet units EXCEPT 25-PFS/PFSP. See PU-4C440 if you have a 25-PFS. [Add to Cart] [View Cart] |
AC-SH Spring Handle (1 lb. each)$3.64 Door spring handle (large). Color: Brass. Fits 1/2" diameter rod. Shown on 10-CPM, works on all stoves listed on this page. [Add to Cart] [View Cart] |
PU-4C442 Convection Blower (6 lbs. each)$130.98 Convection (Room Air) Blower. 140 cfm. IMPORTANT: For all pellet models listed on this page except 2002 and newer "Deluxe" freestanding and insert pellet models ("Deluxe" models have louvers beside the door and include model numbers models 25-PDV, 25-PI, 55-SHP22, 55-SHP20, 55-TRP22, 55-TRP20, 55-SHP22L and American Heritage models). If 2002 or newer "Deluxe" model, see Part Number PU-4C447 Convection Blower. **NOTE on Older Models: Model years 1989-90 use one room air blower; Model years 1991-95 use two room air blowers. (If 1991-95 model, stand behind the stove and determine if "left" or "right" blower, and note this in the "Ordering Instructions" box in your Shopping Cart.) Model years 1996 and later use one room air blower. **NOTE: Please include model number and manufacture date of your stove in the "Ordering Instructions" box of your Shopping Cart. [Add to Cart] [View Cart] |
PU-DTSTAT Wall Thermostat (1 lb. each)$56.85 Digital Wall Thermostat. Can be used on all of our pellet units, as well as our multi-fuel unit. Mercury-Free! Comes with proprietary instructions for installing on our units. NOTE: Does NOT turn pellet stove On & Off, it does increase or decrease the pellet feed rate as needed. EXCEPTION: For our multi-fuel model and our pellet models with "EP" or "PAH" in model number, will turn entire unit on & off as needed. [Add to Cart] [View Cart] |
AC-3000 3" Pellet Vent Kit (16 lbs. each)$253.41 Through-the-wall 3" Pellet Vent Kit (mfg. by Dura-Vent). Contains all the parts needed for most pellet installations. NOTE: See AC-3000 page on our site for more info. Not for pellet insert. See Part Number PU-3060F on this site and your manual (and call Technical Support at (800) 245-6489, if questions) for insert installation. Not for high altitude (over 4,000 ft.); see AC-3100 kit. See Owner's Manual for information on long runs of pipe, basement installs, and general installation information. Always follow local codes. [Add to Cart] [View Cart] |
PU-HLG Gasket (1 lb. each)$18.98 Hopper Lid Gasket for pellet stove hopper lids. Includes self-adhesive backing for easy strip and press application. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
PU-62-40-151-3 Hopper Lid Latch (1 lb.)$25.91 Recessed Hopper Lid Latch. One per package. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. For all pellet units manufactured 2002 and later. For units manufactured prior to 2002, see Part Number PU-103-50. [Add to Cart] [View Cart] |
AC-AV2 Ash Vacuum (30 lbs. each)$269.95 **PLEASE NOTE: This part will drop ship from the manufacturer, and may take a week or longer than parts that ship from our location. For fireplaces, barbeques or our wood and pellet stoves (very handy item for our stoves!). If you have ever tried to vacuum out your ashes with a vacuum cleaner only to turn around when you are done to see a cloud of ash hovering around your head then you have come to the right spot. The AC-AV2 is the Cadillac of Ash Vacuums. With its quiet design and powerful motor, this is the vacuum of choice. This vacuum is "the quiet one." Makes for much easier and "cleaner" ash cleaning experience. Comes with flame retardant hose. 3 gallon ash capacity; Height 20". Also available: See our AC-AVT Tool Package. Learn more about our Ash Vacuum [Add to Cart] [View Cart] |
AC-3003 Remote Thermostat (2 lbs. each)$167.48 Enjoy the convenience of remote control with your Pellet stove! (See exceptions below)... -- Without having to purchase a retro kit or any other expensive adaptation. System is simple to install - installs in about 5 minutes! This great remote control system will fit your existing Englander, Summers Heat or Timber Ridge Pellet stove (fits all pellet models with manufacture date between 1993 and 2003). NOTE: Will NOT work with 2004 or later pellet stove, with the exception of the models listed below. If you have a 2004 or later pellet stove, see wall thermostat. (NOTE: Exception -- Does work with our multi-fuel stoves (stoves with CPM in model number), and DOES work with our pellet stoves with "EP" or "PAH" or "IP" in model number). Learn more about our Remote Thermostat [Add to Cart] [View Cart] |
|
AC-3100 4" Pellet Vent Kit (19 lbs. each) $313.72 Through-the-wall 4" Pellet Vent Kit for high-altitude installations (over 4,000 ft.). Contains all the parts needed for most (high-altitude) pellet installations. Comes with 3" - 4" increaser, so it will work with our stoves (or others) with 3" diameter exhaust. Mfg. by Dura-Vent. NOTE: See AC-3000 page on our site for more info. Although this info. page will be for the AC-3000 kit, this kit is similar (except that this kit is 4" diameter pipe instead of 3"). Not for pellet insert. See Part Number PU-3060F on this site and your manual (and call Technical Support at (800) 245-6489, if necessary) for insert installation. See Owner's Manual for information on long runs of pipe, basement installs, and general installation information. Always follow local codes. [Add to Cart] [View Cart] |
AC-HLSB Hopper Lid Safety Switch Button Type (1 lb. each)$16.99 Hopper Lid Safety Switch. Sometimes listed as AC-HLS or PU-HLS. Important! You must replace with the type of switch that came with your stove...If your switch is a "arm" type rather than this, see AC-HLSA. AND please specify the model number AND manufacture date of your stove in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
PU-VH Vacuum Hose Kit (1 lb. each)$12.07 Vacuum Hose Kit for vacuum shut-down switch. Contains one 21-inch piece and two 12-inch pieces. This should fit whatever model you have. For all stove models listed on this page. **NOTE: Please specify your stove's Model Number and Manufacture Date in the "Ordering Instructions" box on the Checkout screen when ordering this part. [Add to Cart] [View Cart] |
AC-SHN Nickel Spring Handle (1 lb. each)$3.64 Door Spring Handle (large). Color: Brushed Nickel. Fits 1/2" diameter rod. Shown on 49-SHCPML, works on all stoves listed on this page. [Add to Cart] [View Cart] |
AC-AV Ash Vacuum (30 lbs. each)$249.95 **PLEASE NOTE: This part will drop ship from the manufacturer, and may take a week or longer than parts that ship from our location. For fireplaces, barbeques or our wood and pellet stoves (very handy item for our stoves!). Makes for much easier and "cleaner" ash cleaning experience. Comes with flame retardant hose. 3 gallon ash capacity; Height 20". Also available: See our AC-AVT Tool Package. Learn more about our Ash Vacuum [Add to Cart] [View Cart] |
AC-AVT Tool Kit for Ash Vac (2 lbs. each)$20.95 **PLEASE NOTE: This part will drop ship from the manufacturer, and may take a week or longer than parts that ship from our location. Tool Package for the AC-AV or AC-AV2 Ash Vacuum (works with either vac). Includes: Crevice Tool, Brush Tool and Pellet Stove Cleaning Hose. This package is a must for pellet stove owners, as the cleaning hose will allow you to reach small openings much easier. Also, Wood and Pellet stove owners: Brush Tool is made of horse hair (very good at cleaning stove door glass!) [Add to Cart] [View Cart] |
PU-CHA Cartridge Heater (Assembled) (1 lb. each)$64.37 Cartridge Heater element for Auto-Start pellet units (Auto-Start units have manufacture date of 2004 or later). Comes with locking collar. This is the element that fits inside the Auto-Igniter element tube...this element fits the bolt-on tube (stoves manufactured before August 2004) as well as the built-in cast tube (stoves manufacutured after August 1, 2004). Please include your stove's Model Number and Date of Manufacture in the Ordering Instructions box before checking out. [Add to Cart] [View Cart] |
CU-047042 2.4 RPM Motor (4 lbs. each)$130.98 2.4 rpm auger ('feed') motor for our Multi-Fuel unit - models with 10-CPM, 49-SHCPM, 49-SHCPML or 49-TRCPM in the model number. ALSO is the auger ('feed') motor for the pellet utility furnace (models with "PUF" in model number) AND the Pellet Auxiliary Heater (models with 25-PAH, 55-SHPAH, 55-SHPAHL or 55-TRPAH in the model number). ALSO is the stirrer motor (turns the stirrer) for the Corn Stove - model numbers 10-CDV, 49-SHC22 or 49-TRC22. [Add to Cart] [View Cart] |
CU-VS Vacuum Shut-Down Switch (1 lb. each)$50.94 Vacuum Shut Down Switch. This is the "Door Ajar Switch." The vacuum hose from this switch connects directly to the firebox of the stove. This part is used in 2006 and later model pellet stoves. Contact Technical Support at (800) 245-6489 if you have any questions. [Add to Cart] [View Cart] |
CU-RG Rubber Vibration Dampener (1 lb. each)$3.64 1/4" wide X 3" Gasket for models listed on this page... Click Here to see an auger motor diagram (from PAH stove), CU-RG is number 29 on diagram. NOTE: Interchangeable with CU-RGN nylon gasket, both perform the same function. [Add to Cart] [View Cart] |
AC-120 Brass Window Trim (2 lbs. each)$99.25 Brass Window Trim. This is actually a 15-piece kit that will provide trim for all 3 windows; very good quality, instructions included. Note: Shown on 25-EP, works on any stove listed on this page. [Add to Cart] [View Cart] |
AC-DGKEP Door Gasket Kit (2 lbs. each)$15.58 Door Gasket Kit for "Evolution Pellet" models listed on this page. 3/4" round door gasket, includes silicone necessary to install. IMPORTANT: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
PU-CGEP Cradle Gasket (1 lb. each)$9.24 Cradle Gasket for models listed on this page. Gasket may have round holes or slots, either will work. Click Here to see a parts diagram, Cradle Gasket is number 6 on diagram. This shows the Cradle Gasket on models with "EP" in model number, but is also for models with "PAH" in model number, see owner's manual or parts diagram for your stove. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
PU-CBEP Digital Control Board (3 lbs. each)$217.09 Digital System Control Board (rear of board is pictured). For "Evolution Pellet" models listed on this page. **NOTE: Please specify your stove's Model Number and Manufacture Date in the "Ordering Instructions" box on the Checkout screen when ordering this part. [Add to Cart] [View Cart] |
|
IP-25EP Impingement Plate (18 lbs. each) $55.79 Impingement Plate (baffle) for "Evolution Pellet" models listed on this page. Click Here to see a parts diagram, Impingement Plate is number 16 on diagram. Please be sure to list model number and mfg. date in the Ordering Instructions box when you check out. [Add to Cart] [View Cart] |
|
PU-ECCEP Cleanout Covers (1 lb. each) $5.72 Exhaust Cleanout Covers for "Evolution Pellet" models listed on this page. There are two covers (one on either side of the burn pot); this is for the set of both covers. Click Here to see a parts diagram, Cleanout Covers are number 17 on diagram. Please be sure to list model number, serial number and mfg. date in the Ordering Instructions box when you check out. [Add to Cart] [View Cart] |
|
CA-40 Bay Window Door (8 lbs. each) $142.50 Bay Window-style replacement door (steel) for "Evolution Pellet" models listed on this page. Shown is our Model 25-EP; door works on all models listed on this page. [Add to Cart] [View Cart] |
AC-EPK Pellet Insert Backplate Conversion Kit (48 lbs. each-CANNOT ORDER ONLINE, must call for quote)$233.75 NOTE: CANNOT order this online. Please call for shipping quote: (800) 516-3636. This description is to help answer questions before you call, but you must call for shipping quote, cannot order online. Backplate Conversion Kit. This kit will actually convert a freestanding "Evolution Pellet" model (25-EP, 55-SHPEP, 55-SHPEPL or 55-TRPEP) to a fireplace insert model (shown). Product may vary slightly from pictured, but the steel parts (painted black) come with instructions for converting any of the listed freestanding models so that it will work in a fireplace (insert is approved for masonry or "zero-clearance" pre-fab. fireplaces). NOTE: NOT approved for use in a Mobile Home when used as a fireplace insert (freestanding stove is approved for Mobile Home use). Must Call for Shipping [View Cart] |
PU-APEP Ash Pan (8 lbs. each)$65.00 Ash Pan for "Evolution Pellet" models listed on this page. [Add to Cart] [View Cart] |
AC-G40 Glass Kit (4 lbs. each)$98.22 Center Door Glass. Includes 10.675" x 14.438" glass, and gasket necessary to install. Shown on 25-EP, works on all models listed on this page. [Add to Cart] [View Cart] |
AC-G41 Glass Kit (2 lbs. each)$27.86 Side Door Glass Panel. Includes one (1) panel of glass, size 10.675" x 3.938", and gasket necessary to install. If you need both side panels, you will need to order two of these. Shown on 25-EP, works on all models listed on this page. [Add to Cart] [View Cart] |
AC-CFBEP Brick Fiber Board (3 lbs. each)$60.06 Ceramic Fiber Board for "Evolution Pellet" Stove models listed on this page. See picture for reference, also Click Here to see a parts diagram, Fiber Board is number 30 on diagram. [Add to Cart] [View Cart] |
PU-AFEP Auger (2 lbs. each)$31.54 Steel Auger for all "Evolution Pellet" (Freestanding and Insert models), Pellet Utility Furnace and Pellet Auxiliary Heater Stove models listed on this page. NOTE: Auger only, does not include any other auger assembly parts. Click Here to see an auger motor diagram (from the "Evolution Pellet" Stove), Auger is number 21 on diagram. [Add to Cart] [View Cart] |
PU-BPCEP Burn Pot Cradle (10 lbs. each)$123.80 Burn Pot Cradle for "Evolution Pellet" Stove models listed on this page. This is a one-piece unit, and is the "cradle" that houses the burn pot; it does not include the burn pot (see picture). Click Here to see a parts diagram, Cradle is number 18 on diagram. [Add to Cart] [View Cart] |
PU-BPEP Burn Pot (5 lbs. each)$63.75 Burn Pot unit for "Evolution Pellet" Stove models listed on this page. This is a one-piece unit, and is the actual burn pot (does not include the "cradle" - see picture). Click Here to see a parts diagram, Burn Pot is number 19 on diagram. [Add to Cart] [View Cart] |
AC-LSEP Log Set (3 lbs. each)$75.20 Log set for all "Evolution Pellet" Stove models listed on this page. [Add to Cart] [View Cart] |
CA-AMPP Auger Mounting Plate (5 lbs. each)$30.43 Auger Mounting Plate for stove models listed on this page. Click Here to see an auger motor diagram (from the "EP" Stove), Mounting Plate (Collar) is number 14 on diagram. **NOTE: Please specify your stove's Model Number and Manufacture Date in the "Ordering Instructions" box on the Checkout screen when ordering this part. [Add to Cart] [View Cart] |
CA-AC Auger Coupler (1 lb. each)$14.55 Auger Coupler for stove models listed on this page. Click Here to see an auger motor diagram (from the "EP" Stove), Auger Coupler is number 15 on diagram. **NOTE: Please specify your stove's Model Number and Manufacture Date in the "Ordering Instructions" box on the Checkout screen when ordering this part. [Add to Cart] [View Cart] |
|
AC-GSEP Glass Support Set (1 lb. each) $7.59 Glass Support Brackets for all "Evolution Pellet" Stove models listed on this page. This includes the set of brackets (supports). Click Here to see a parts diagram, Glass Support Set is number 22 on diagram. [Add to Cart] [View Cart] |
PU-DVDEP Video for "Evolution Pellet" Models (DVD, 1 lb. each)$0.00 For our "Evolution Pellet" models... DVD which covers a variety of pellet stove installation, maintenance and servicing procedures for Englander, Summers Heat and Timber Ridge models. Cost:You pay only Shipping & Handling. [Add to Cart] [View Cart] |
AC-AVF Filter Package for Ash Vac (1 lb. each)$38.95 **PLEASE NOTE: This part will drop ship from the manufacturer, and may take a week or longer than parts that ship from our location. Filter Kit Package for the AC-AV and AC-AV2 Ash Vacuum (works with either vac). Includes: Primary Filter and Secondary Filter (both are required). These filters will typically last for many years depending on the use, but it is a good idea to have a filter package on hand for replacement purposes. NOTE: These filters are only for the Loveless brand ash vacuums, will not fit others. [Add to Cart] [View Cart] |
AC-APG Ash Pan Gasket (1 lb. each)$14.55 Gasket kit for the ash pan of the stove. Includes gasket (3/4" wide, adhesive on one side). In the Comments box, be sure to include: Your stove's model number, date of manufacture and serial number. Note: Will be similar to product shown here. [Add to Cart] [View Cart] |
|
AC-GGKEP Glass Gasket Kit (1 lb. each) $19.25 Window glass gasket kit for stoves with "EP" in model number. Includes gasket (approx. 3/4" x 10' flat, adhesive on one side). Does not include glass. Includes self-adhesive backing for easy strip and press application. For all orders, in the Comments box, be sure to include 1) Your stove's model number, date of manufacture and serial number AND 2) whether this is being ordered for glass gasket or ash pan gasket. [Add to Cart] [View Cart] |
AC-120-BN Nickel Window Trim (2 lbs. each)$99.25 Nickel Window Trim. This is actually a 15-piece kit that will provide trim for all 3 windows; very good quality, instructions included. NOTE: For Nickel door handle, see AC-SHN. Note: Shown on 25-EP, works on any stove listed on this page. [Add to Cart] [View Cart] |
|
AC-HP Hinge Pin Rivet (1 lb. each) $1.25 Hinge Pin Rivet for cast stove door; 3/8" x 1 3/4". Price shown is for one pin. [Add to Cart] [View Cart] |
PU-CBMG Combustion Blower Gasket and Motor Gasket (1 lb. each)$13.50 Contains the following two items: 1. Combustion Blower Gasket. Fits on Exhaust (Combustion) Blower flange, where blower meets stove. The odd-shaped gasket pictured at top left. 2. Combustion Blower Motor Gasket. Fits on Exhaust (Combustion) Blower motor, so that you can remove the motor from the Combustion Blower housing, clean your stove, and replace the motor and gasket without having to remove the entire Combustion Blower. Replace the appropriate gasket each time you remove your motor (or entire blower assembly) to clean it. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
AC-HLSA Hopper Lid Safety Switch Arm Lever (1 lb. each)$16.99 Hopper Lid Safety Switch. Sometimes listed as AC-HLS or PU-HLS. Important! You must replace with the type of switch that came with your stove...If your switch is a "button" type rather than this, see AC-HLSB. AND please specify the model number AND manufacture date of your stove in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
|
We appreciate your business!
|